# 70--INTERFACE UNIT,DATA, IN REPAIR/MODIFICATION OF

Notice 6e15f40c9cb64d26a779a6ca2544a707 (solicitation N0038326QFC05) from DEPT OF DEFENSE, NAVSUP WEAPON SYSTEMS SUPPORT, posted 2026-10-30, responses due 2026-10-30T20:30:00.000Z. Status: open.

| Field | Value |
| --- | --- |
| Notice ID | 6e15f40c9cb64d26a779a6ca2544a707 |
| Solicitation number | N0038326QFC05 |
| Type | Solicitation |
| Agency | DEPT OF DEFENSE |
| Sub-tier | DEPT OF THE NAVY |
| Office | NAVSUP WEAPON SYSTEMS SUPPORT |
| Posted | 2026-10-30T11:04:26.000Z |
| Response deadline (UTC) | 2026-10-30T20:30:00.000Z |
| Set-aside | - |
| NAICS | 333998 |
| PSC | 7E20 |
| Place of performance | - |
| Award | - |

## Description

CONTACT INFORMATION|4|N732.79|N00383|771-229-2440|casey.m.brown20.civ@us.navy.mil| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (Combo)||HQ0339|N00383|S1111A|S1111A|See schedule|98897||||||||| The purpose of this amendment is to address the following change to the solicitation: 1. The quantity is hereby decreased BY 2 FROM 39 TO 37. 2. The total quantityis hereby updated to 37. This amendment is issued by the Government when deposited in the mail,transmitted by facsimile or sent by any electronic commerce method, includingemail. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this amendment. POC email: casey.m.brown20.civ@us.navy.mil \ This is a sole source requirement for the following: NSN: 7RH 7025 016241529 KB PART NUMBER: 698258-7 NOM: INTERFACE UNIT,DATA QTY: 39 The Government physically does not have in its possession sufficient, accurate, or legible data to contract with other than the current source. One or more of the items under this acquisition is subject to Free Trade Agreements. (FAR 52.225-3). One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. (FAR 52.225-5) These items require Government Source Approval prior to award. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure, which can be obtained on the internet at https://www.navsup.navy.mil/Business-Opportunities/Home/ Offers received which fail to provide all data required by the source approval brochure will not be considered for award under this solicitation. For information or questions regarding this notice, please contact Casey Brown at the email address casey.m.brown20.civ@us.navy.mil. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be repaired, tested andinspected in accordance with the terms and conditions specified in theRequirements Section of this document. 1.3 Unless expressly provided for elsewhere in this clause, equipment suchas fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, orany other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 The use of MIL-W-81381 wire in any item to be delivered under this procurement is prohibited. The foregoing prohibition applies notwithstanding any reference to MIL-W-81381 wire that may be made in any of the drawings or specifications for this procurement. SAE-AS22759 series wire shall be used in lieu of MIL-W-81381 wire, in any place where MIL-W-81381 wire is cited in this procurement. Any questions concerning this requirement should be directed to the Procuring Contracting Officer. 1.5 If MIL-STD-454 is referenced in the drawings or in the specification,the contractor is expected to show compliance with IPC/EIAJ-STD-001C Personnel performing tasks in accordance with IPC/EIAJ-STD-001C shall be trained and certified as requried by IPC/EIAJ-STD-001C paragraph 5.1.4. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled). 3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired). 3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: INTERFACE UNIT,DATA ;698258-7; P/N, ;016241529; NSN, ;IAW Applicable manuals.; Tech Publications 

## Sources

- View on SAM.gov: https://sam.gov/opp/6e15f40c9cb64d26a779a6ca2544a707/view
- Data as of 2026-11-14. Source: https://sam.gov/data-services/Contract%20Opportunities/datagov

## Cite this

"70--INTERFACE UNIT,DATA, IN REPAIR/MODIFICATION OF, SAM.gov contract opportunity 6e15f40c9cb64d26a779a6ca2544a707." samgovapi.io, https://samgovapi.io/opportunity/6e15f40c9cb64d26a779a6ca2544a707, data as of 2026-11-14. Primary record: https://sam.gov/opp/6e15f40c9cb64d26a779a6ca2544a707/view

## API and MCP

- REST: GET https://samgovapi.io/api/v1/opportunities/6e15f40c9cb64d26a779a6ca2544a707
- MCP tool: get_opportunity

Independent. Not affiliated with, endorsed by or sponsored by GSA, SAM.gov or any U.S. government agency. Registering in SAM.gov is free at sam.gov.

Get a free API key: https://samgovapi.io/sign-up?ref=ai-claudebot