# REQUEST FOR INFORMATION (RFI) For Manufacturing/Procurement of Linear Actuating Cylinder Assembly

Notice cab9fc0d57c84c6288bf230594c44dc1 (solicitation SPRWA1-27-00051) from DEPT OF DEFENSE, DLA AVIATION AT WARNER ROBINS, GA, posted 2026-11-10, responses due 2026-12-10T20:30:00.000Z. Status: open.

| Field | Value |
| --- | --- |
| Notice ID | cab9fc0d57c84c6288bf230594c44dc1 |
| Solicitation number | SPRWA1-27-00051 |
| Type | Sources Sought |
| Agency | DEPT OF DEFENSE |
| Sub-tier | DEFENSE LOGISTICS AGENCY |
| Office | DLA AVIATION AT WARNER ROBINS, GA |
| Posted | 2026-11-10T16:54:06.000Z |
| Response deadline (UTC) | 2026-12-10T20:30:00.000Z |
| Set-aside | - |
| NAICS | 336413 |
| PSC | 1650 |
| Place of performance | - |
| Award | - |

## Description

REQUEST FOR INFORMATION (RFI) For Manufacturing/Procurement of Linear Actuating Cylinder Assembly Noun NSN Part Number Linear Actuating Cylinder Assembly 1650-01-187-9395HL 205-076-056-107 CAUTION: The Government is conducting market research to identify potential sources that possess the data, expertise, capabilities, and experience to meet qualification requirements to manufacture/procure the Linear Actuating Cylinder Assembly, which is applicable to the TH-1H Helicopter. The Linear Actuating Cylinder Assembly has an Acquisition Method Code (AMC)/ Acquisition Method Suffix Code (AMSC) code of 1/C.AMC 1: Suitable for competitive acquisition for the second or subsequent time. AMSC C: This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. See Attachment 1 (Source Qualification Statement). If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid. The technical data required to manufacture the Linear Actuating Cylinder Assembly is not owned by the Government. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. The Original Equipment Manufacturer (OEM) for the TH-1H Linear Actuating Cylinder Assembly is Woodward HRT, Inc. (CAGE: 81873). The OEM for the TH-1H Helicopter is Bell Textron, Inc. (CAGE: 97499) The Government has determined that this assembly is a commercial item as defined in Revolutionary Federal Acquisition Regulation Overhaul (RFO) 2.101. Commercial item descriptions, commercial vendor catalog or price lists or commercial manuals assigned a technical manual number apply. Contractor shall furnish all material, support equipment, tools, test equipment, and services. The contractor is responsible for providing, maintaining, and calibrating all support equipment required at their facility or a subcontractor’s facility. Contractor furnished material or parts used for replacement shall equal or exceed the quality of the original material or parts. DISCLAIMER: This RFI is for informational purposes only. This is not a Request for Proposal or a promise to issue a solicitation in the future and shall not be construed as a commitment by the Government. Responses in any form are not offers and will be treated as information only. The Government is under no obligation to award a contract because of this announcement. Contractors/Institutions responding to this market research are placed on notice that participation in this survey may not ensure participation in future solicitations or contract awards. The government will not reimburse participants for any expenses associated with their participation in this survey. Any information submitted by respondents is strictly voluntary. Although “proposal” and “offeror” may be used in this RFI, your response will be treated as information only. It shall not be used as a proposal. This solicitation is issued for the purpose of identifying any additional potential procurement sources capable of manufacturing these assets. INSTRUCTIONS: The document below contains a description of the Linear Actuating Cylinder Assembly procurement requirements and a Contractor Capability Survey. The Survey allows Contractors to provide their company’s capability. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company’s capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. ATTENTION: SMALL BUSINESS RESPONDENTS who are interested in participating in this effort: a. No set aside decision has been made; however, the Government will determine the final strategy after thorough analysis of the small business responses and other market research available, considering the demonstrated interest and capability. Please ensure that you provide a thorough response to each question. If your company does not currently possess the full capability required to fulfill the entire requirement, what teaming/partnership/joint venture/subcontracting arrangement do you have in place to fulfill the government needs? Providing evidence of this arrangement, e.g. emails, letters, etc. that demonstrates a united response to this RFI is highly encouraged but not required. The evidence should state the type of arrangement and the role each member will fulfill. If you are only interested in being a subcontractor to the future awardee, state the portion of the work that your organization has capability of fulfilling. b. Identify any areas of work that your organization believes should be broken out exclusively for Small Business. 3. Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. 4. Questions relative to this RFI should be addressed to Logistics Manager Jessica Parton at jessica.parton@us.af.mil and Contract Specialist, Rebecca Taylor at Rebecca.Taylor.21@us.af.mil. 5. Please complete both Part I and II of the Contractor

## Sources

- View on SAM.gov: https://sam.gov/opp/cab9fc0d57c84c6288bf230594c44dc1/view
- Data as of 2026-11-14. Source: https://sam.gov/data-services/Contract%20Opportunities/datagov

## Cite this

"REQUEST FOR INFORMATION (RFI) For Manufacturing/Procurement of Linear Actuating Cylinder Assembly, SAM.gov contract opportunity cab9fc0d57c84c6288bf230594c44dc1." samgovapi.io, https://samgovapi.io/opportunity/cab9fc0d57c84c6288bf230594c44dc1, data as of 2026-11-14. Primary record: https://sam.gov/opp/cab9fc0d57c84c6288bf230594c44dc1/view

## API and MCP

- REST: GET https://samgovapi.io/api/v1/opportunities/cab9fc0d57c84c6288bf230594c44dc1
- MCP tool: get_opportunity

Independent. Not affiliated with, endorsed by or sponsored by GSA, SAM.gov or any U.S. government agency. Registering in SAM.gov is free at sam.gov.

Get a free API key: https://samgovapi.io/sign-up?ref=ai-claudebot